After a few weeks of spectacularly warm and dry weather, it finally is looking like November. Grey skies, wet pavement, a couple of bright yellow canopies among a sea of bare branches.
And in the gardens, ornamental grasses.
Fall is really when ornamental grasses shine.
They’ve had all season to grow, and so not only are they usually at their full height, but their inflorescences, or seed heads, are in full display.
And then there’s the fall color. Deep yellows, bright reds, and burgundy… If you have ornamental grasses in your garden, chances are fall is when they’re looking their best.
There are the tall Miscanthus varieties, shorter fountain grasses, and the ground-covering varieties such as Japanese forest grass. Then there are native grasses: switchgrass, Indian grass, and little bluestem, among others. Little bluestem, for example, acquires a beautiful bluish, reddish, almost purple color in the fall. I’ve even noticed it growing in some of the ditches and between stretches of highway here in Ontario, where I think there’s been an effort to seed with native species. Right now, it’s especially easy to spot.
Fall is also when some important maintenance decisions get made.
Do you want to keep your grasses standing over the winter, so a winter breeze can rustle through them and snow can land on its inflorescences, or would you rather chop them down and have everything neat and tidy?
Usually, I like to wait until later in November before cutting them down. In early November, many grasses are still looking absolutely beautiful. Why would you have grasses all season if you’re not going to enjoy them when they’re at their best?
However, sometimes wet weather or personal schedules give you little wiggle room. If you’re cutting down your grasses in the fall, when you have time is the best time to do it.
To Cut or Not to Cut
There are many reasons to keep your ornamental grass over the winter. Some specifically include them in their gardens for their winter interest. If that’s your preference, you don’t have to worry about chopping them down until spring.
Grasses can create beautiful winter features, especially when snow settles gently over their seed heads and stalks.
But what does that realistically look like?
Depending on the amount of snowfall you get, particularly with taller grasses such as Miscanthus and fountain grass, they may not remain upright for very long. If you’re in an area with heavy snowfall, or near a driveway where snow piles up, they tend to flatten.
So you may have a beautiful display through November and December, but by January or February, the grasses are lying flat.
I visited a garden in Kitchener-Waterloo where the owners were wondering whether they should keep their ornamental grasses standing over winter. As usual, my advice was that if they liked the look, they could keep them. But they also needed to consider their conditions.
After the first winter, they realized that the snowfall in their area was simply too heavy for the grasses to remain attractive through winter. The following fall, they decided to cut them down.
There are ways to give taller grasses a little extra structure. I’ve seen Miscanthus grasses French braided around their middle, creating a sort of crown surrounding a central column of upright stalks. I’ve even seen a spiral French braid that works its way around the entire grass, creating something like a cone. This can help keep the grass upright and add an interesting feature of its own.
But appearance isn’t the only reason to leave grasses standing.
They can also provide shelter for wildlife and insects.
Last year, while cutting down some fountain grasses, I found a praying mantis egg case attached to one of the stalks. I carefully cut away the piece of grass carrying the egg case and stashed it somewhere inconspicuous in the garden, where it might be safe from birds.
Praying mantises generally hatch in late spring, around May, so keeping the grass standing to protect an egg case means waiting quite a while before cutting it down. Harvesting the stalk and placing it somewhere sheltered was my way of accommodating both the mantis and the maintenance.
There are other considerations, too. The fountain grass I was cutting, Pennisetum ‘Rubrum’, self-seeds profusely. Cutting it down in fall helps somewhat manage the spread, and even though it doesn’t prevent it entirely, it significantly reduces the amount of seedlings I have to weed the next year.
So if you’re keeping grasses for ecological reasons, it’s worth doing a little research first. The grass you’re leaving standing, the wildlife you’re hoping to protect, and the timing of your maintenance all matter.
And then there’s simply the question of time. Perhaps you have less time in the fall and more time in the spring. Leaving your grasses standing moves that work to another season.
Different grasses also behave differently.
Japanese forest grass, for example, turns a lovely tan color and creates a low, textured ground cover. Snow can settle over it without creating the same sort of mess as a tall Miscanthus collapsing onto itself.
You might decide to keep your Japanese forest grass standing and cut down your taller grasses. You don’t have to make a blanket decision for everything.
Cutting Down Grasses
If you’ve decided to cut your grasses, there are a few ways to go about it.
I use three main tools: a hedge trimmer, a pair of shears, and hand pruners.
For most of my grasses, I use a battery-operated hedge trimmer. It makes the work much easier, requires relatively little strength, and allows me to make fairly organized cuts. I don’t have to worry about cords or gas, and it’s easy to carry around the garden.
Sometimes, though, I’m working around garden lighting, cables, or in an area that’s too small or awkward for a hedge trimmer. That’s where shears come in.
Hand pruners are always on deck. Even when I’m using a hedge trimmer or shears, I use my hand pruners for the final tidying, cutting away scraggly blades or cleaning up the edges.
For larger meadows, there’s another option: a scythe.
I maintain a native meadow planted with switchgrass, Indian grass, and some bluestem, and I use a scythe to cut it down. For that kind of work, I find it quicker and more effective than using a weed whacker or edge trimmer.
Before cutting, though, protect yourself.
Always wear gloves and long sleeves when handling ornamental grasses. Their blades can be surprisingly sharp and can slice your skin. When gathering large clumps, pay attention to your wrists, ankles, neck, face, and any other exposed skin.
There’s one particular fountain grass I maintain, Pennisetum ‘Rubrum’, that requires an additional piece of equipment: a rain jacket.
Its seed heads are extremely aggressive. When I handle the grass, they attach themselves to my clothes, particularly the fleece sweaters I tend to wear this time of year. By the time I’ve finished cutting, I look like a porcupine.
And they’re uncomfortable. The seed heads poke through the fabric, and removing them afterward means picking hundreds of them out by hand.
A rain jacket solves that problem. The seed heads don’t cling to it the way they do to fleece.
Height and Shape
I usually cut ornamental grasses to about six to eight inches above the ground.
I wouldn’t cut them all the way down to ground level. You want to leave some of the grass remaining and avoid cutting into the crown. As a general rule, I wouldn’t go lower than about four inches, although the appropriate height depends on the grass.
If you’re cutting down grasses in an established garden for the first time, you can often see how they were cut the previous year. The old, dead stems will still be visible, and you can use them to judge the previous cutting height.
As with pruning cuts, you can read the plant material to see what was done before.
The height also depends on the shape you’re trying to create.
With fountain grass, for example, I like to create a dome. The outside edge might be about four inches tall, while the center is closer to six or eight inches. The result is a neat little half-globe.
You could also make something more cone-shaped, depending on your preference. Your hedge trimmer is a sculpting tool.
That’s one of the fun things about cutting down grasses. You can determine the shape of the mound that remains.
Other grasses don’t offer quite the same flexibility.
With upright grasses such as Karl Foerster feather reed grass, I tend to make a straight cut across.
Japanese forest grass spreads by rhizomes, eventually creating a fairly flat mat rather than an individual mound. For those, I simply cut across the surface. There’s not much shaping to do.
Managing the Cut
How you cut a grass also affects how it falls, and that can make gathering it afterward much easier.
With fountain grass, I tend to start near the center and work outward with my hedge trimmer, moving around the grass in a circular motion, clockwise or counterclockwise.
As I cut, the stalks naturally fall outward, creating a sort of fan all around the remaining mound.
It doesn’t always fall perfectly, but once you get the hang of it, you can control where much of the material lands.
Large Miscanthus grasses require a slightly different approach.
I usually start from one edge and work inward, allowing the stalks to fall over the hedge trimmer or shears and tip outward onto the ground.
Sometimes I’ll make one cut, remove that section, and then continue. A large clump might take two, three, or four cuts to lay the whole thing down. Managing each load individually makes the work easier.
Shorter grasses, such as Japanese forest grass or Japanese blood grass, can simply be cut and allowed to fall where they are. You can then rake away the material or gather it by hand.
With larger grasses, I herd the cut stalks together into a clump. If you’re composting, you can load the material into a wheelbarrow or onto a tarp and carry it to your compost pile. Once there, you can even use your hedge trimmer to slice the stalks into smaller pieces so they’ll break down faster.
If you’re using garden waste bags, large Miscanthus grasses can be a little more challenging.
I usually begin by gathering the cut stalks together on the ground and squaring off the bottom edge, so I end up with a reasonably neat bundle.
A mature Miscanthus may be too large to handle all at once, so I’ll often divide the cut material into two, three, or four smaller bundles.
With the bundle still on the ground, I kneel beside it, placing one knee near the spot where I want the grass to fold.
I gather one half of the bundle into my arms, usually the half with the inflorescences, and fold it over toward the cut ends.
Then I change my grip, using my arms and knees to establish a firm fold.
It doesn’t have to be perfect. The point is simply to make the bundle manageable enough to fit into a garden bag.
I push the folded end into the bag first, then fold the loose ends inward. A leaf chute is essential here because it keeps the bag open while I’m working.
Usually, I can fit one Miscanthus grass into a bag, depending on its size.
And this is another point where protective clothing is essential. When you’re wrestling with a large bundle of Miscanthus, the sharp blades can reach all sorts of exposed skin. Watch your face, neck, wrists, and ankles, not just your arms. Fitting a mature Miscanthus into a yard waste bag is a full body endeavour.
What Remains
Once the grass has been cut down and the material removed, you have a chance to look at what’s happening inside the clump.
You’ll often notice older stems from previous years. They’re usually grayish, a different color from the newer growth, and some may already be loose.
Try gently pulling at some of the dead stems. The loose ones will often come away easily.
You can also place your hands flat on top of the cut surface, direct some of your body weight into them, and gently wobble the stalks underneath. Some of the older, dead material will loosen, and you can remove it to give the new growth a little breathing room.
As Miscanthus clumps age, they often begin dying from the center outward.
You may notice that the middle of a large clump has become hollow, with most of the living growth concentrated around the outside.
This doesn’t necessarily mean you have to divide the grass.
But if you’ve been thinking about splitting it, either to propagate it or simply to keep the clump at a reasonable size, this is a good opportunity to see what’s going on.
With the tall growth removed, you can clearly see the structure of the plant, and it’s much easier to work with.
Depending on the species and conditions, division may be possible in fall, although spring is generally a safer time for warm-season grasses such as Miscanthus.